The handle bars of the bike are based on the handle bars of the vintage horse drawn drill plough as shown above. I then used 25x6mm flat bar and shaped two pieces in the shape of the plough handle bars and tacked them together. I welded a piece of 6mm round bar to represent the cross bar. I tapered the edges of the flat bar and welded the complete unit to the suspension unit.

I painted the frame with a matt black paint. I decided on matt black because I felt it would make the tank, seat, engine and handlebars more prominent when you look at the bike.

On November 28, 2011. On November 27, 2011. I have began to assemble the bike. On November 27, 2011. On November 27, 2011. I made the handlebars from 16mm steel bar and welded then using the tig weld. On November 27, 2011. I made the front mud guard from 5mm and 4mm steel I then gas welded it together. On November 27, 2011.

Red Bull Gives You Wings. Red Bull Gives You Wings. Create a free website or blog at WordPress.

For the spraying i used Audi Laser Red, Fiat Broom yellow, B. Jet Black, Toyota Silver, all items were primed and lacqured and put under a heater. My indicators i used a P. board to make flach using a 555 timer and L.